Skip to main page content
 
 
bare-metal foil link mold materials link casting resin link starter kit link decal items link articles specialty items link forum link about us link
   

 

link to bare-metal foil pageClick here to learn about and purchase Bare-Metal® Foil

link to panel scriber pageClick here to read about and purchase the Bare-Metal® Panel Scriber

small trout water splashNew 9 hour DVD series
"Creating an Artificial Water Splash"

link to polytek mold rubber pageClick here for Polytek® Mold Making Rubber Compounds

link to experts-choice decal pageClick here to purchase
Experts-Choice® Decal Film

Click here to read about making concrete stamps using Polytek® 75-80 Polyurethane Rubber

Mold Making Materials


Polytek® Mold Materials
Silicone, polyurethane, latex, and alginate mold materials. Uses for the materials listed on this page include foundry patterns, concrete stamping pads, pre-cast stone mold, resin casting, jewelry patterns molds, human body molds, statuary casting, candle molds, and many other mold making projects.

Hyperlast® Por-A-Mold Low Viscosity Polyurethane Mold Materials

Hyperlast® Por-A-Mold Thixotropic Polyurethane Mold Materials
Hyperlast, formerly known as Synair offers Por-A-Mold polyurethane mold materials. Low Viscosity Por-A-Mold is a 1:1 by volume pourable rubber. Por-A-Mold TA is a 1:1 by volume trowelable rubber that can stay on vertical surfaces.

Uses for the materials listed on this page include foundry patterns, concrete stamping pads, pre-cast stone mold, resin casting, jewelry pattern molds, cold cast bronze, candle molds, and many other mold making projects.

Mold Making and Casting Starter Kit
The perfect place for the beginner to get a start. If you’ve never made a mold or casting before this kit is a must.

Experts-Choice Mold Putty
Easy to use 1:1 ratio mold material for fast duplicating, cures in 20 minutes.

Experts-Choice Low Viscosity Mold Material
Easy to use 1:1 ratio mold material for fast duplicating, cures in 20 minutes.

New! The Prop Builder's Molding & Casting Handbook
Detailed handbook on mold making and casting.

Mold Release Agents, Bronze Power, Microbulb and Solid Spheres
531 wax based, 2300 silicone based release agents. Light and dark bronze powder for cold cast bronze. Microbulb hallow glass filler and solid glass spheres for filling polyurethane resin. .